diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S
index becaab7..9387250 100644
--- a/cpu/mcf5227x/start.S
+++ b/cpu/mcf5227x/start.S
@@ -46,6 +46,11 @@
 	addl	#60,%sp;		/* space for 15 regs */ \
 	rte;
 
+#if defined(CONFIG_CF_SBF)
+#define ASM_DRAMINIT	(asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#endif
+
 .text
 /*
  *	Vector table. This is used for initial platform startup.
@@ -53,8 +58,14 @@
  */
 _vectors:
 
-INITSP:		.long	0x00000000	/* Initial SP	*/
-INITPC:		.long	_START	/* Initial PC		*/
+#if defined(CONFIG_CF_SBF)
+INITSP:		.long	0		/* Initial SP	*/
+INITPC:		.long	ASM_DRAMINIT	/* Initial PC 	*/
+#else
+INITSP:		.long	0	/* Initial SP	*/
+INITPC:		.long	_START	/* Initial PC 		*/
+#endif
+
 vector02:	.long	_FAULT	/* Access Error		*/
 vector03:	.long	_FAULT	/* Address Error	*/
 vector04:	.long	_FAULT	/* Illegal Instruction	*/
@@ -83,6 +94,7 @@
 vector1E:	.long	_FAULT	/* Autovector Level 6	*/
 vector1F:	.long	_FAULT	/* Autovector Level 7	*/
 
+#if !defined(CONFIG_CF_SBF)
 /* TRAP #0 - #15 */
 vector20_2F:
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@@ -122,9 +134,231 @@
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+#endif
+
+#if defined(CONFIG_CF_SBF)
+	/* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
+asm_sbf_img_hdr:
+	.long	0x00000000	/* checksum, not yet implemented */
+	.long	0x00020000	/* image length */
+	.long	TEXT_BASE	/* image to be relocated at */
+
+asm_dram_init:
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+	movec	%d0, %RAMBAR1	/* init Rambar */
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
+	clr.l %sp@-
+
+	/* Must disable global address */
+	move.l	#0xFC008000, %a1
+	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
+	move.l	#0xFC008008, %a1
+	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
+	move.l	#0xFC008004, %a1
+	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
+
+	/*
+	 * Dram Initialization
+	 * a1, a2, and d0
+	 */
+	/* mscr sdram */
+	move.l	#0xFC0A4074, %a1
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
+	nop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#0xFC0B8110, %a1
+	move.l	#0xFC0B8114, %a2
+
+	/* calculate the size */
+	move.l	#0x13, %d1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	lsr.l	#1, %d2
+#endif
+
+dramsz_loop:
+	lsr.l	#1, %d2
+	add.l	#1, %d1
+	cmp.l	#1, %d2
+	bne	dramsz_loop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
+	or.l	%d1, (%a1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
+	or.l	%d1, (%a2)
+#endif
+	nop
+
+	/* dram cfg1 and cfg2 */
+	move.l	#0xFC0B8008, %a1
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
+	nop
+	move.l	#0xFC0B800C, %a2
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
+	nop
+
+	move.l	#0xFC0B8000, %a1	/* Mode */
+	move.l	#0xFC0B8004, %a2	/* Ctrl */
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Issue LEMR */
+	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
+	nop
+	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
+	nop
+
+	move.l	#1000, %d0
+wait1000:
+	nop
+	subq.l	#1, %d0
+	bne	wait1000
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Perform two refresh cycles */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
+	nop
+	move.l	%d0, (%a2)
+	move.l	%d0, (%a2)
+	nop
+
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d0
+	and.l	#0x7FFFFFFF, %d0
+	or.l	#0x10000c00, %d0
+	move.l	%d0, (%a2)
+	nop
+
+	/*
+	 * DSPI Initialization
+	 * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h
+	 * a1 - dspi status
+	 * a2 - dtfr
+	 * a3 - drfr
+	 * a4 - Dst addr
+	 */
+
+	/* Enable pins for DSPI mode - chip-selects are enabled later */
+	move.l	#0xFC0A4036, %a0
+	move.b	#0x3F, %d0
+	move.b	%d0, (%a0)
+
+	/* DSPI CS */
+#ifdef CONFIG_SYS_DSPI_CS0
+	move.b	(%a0), %d0
+	or.l	#0xC0, %d0
+	move.b	%d0, (%a0)
+#endif
+#ifdef CONFIG_SYS_DSPI_CS2
+	move.l	#0xFC0A4037, %a0
+	move.b	(%a0), %d0
+	or.l	#0x10, %d0
+	move.b	%d0, (%a0)
+#endif
+	nop
+
+	/* Configure DSPI module */
+	move.l	#0xFC05C000, %a0
+	move.l	#0x80FF0C00, (%a0)	/* Master, clear TX/RX FIFO */
+
+	move.l	#0xFC05C00C, %a0
+	move.l	#0x3E000011, (%a0)
+
+	move.l	#0xFC05C034, %a2	/* dtfr */
+	move.l	#0xFC05C03B, %a3	/* drfr */
+
+	move.l	#(ASM_SBF_IMG_HDR + 4), %a1
+	move.l	(%a1)+, %d5
+	move.l	(%a1), %a4
+
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0
+	move.l	#(CONFIG_SYS_SBFHDR_SIZE), %d4
+
+	move.l	#0xFC05C02C, %a1	/* dspi status */
+
+	/* Issue commands and address */
+	move.l	#0x8004000B, %d2	/* Fast Read Cmd */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 2 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 1 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 0 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Dummy Wr and Rd */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	/* Transfer serial boot header to sram */
+asm_dspi_rd_loop1:
+	move.l	#0x80040000, %d2
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.b	%d1, (%a0)		/* read, copy to dst */
+
+	add.l	#1, %a0			/* inc dst by 1 */
+	sub.l	#1, %d4			/* dec cnt by 1 */
+	bne	asm_dspi_rd_loop1
+
+	/* Transfer u-boot from serial flash to memory */
+asm_dspi_rd_loop2:
+	move.l	#0x80040000, %d2
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.b	%d1, (%a4)		/* read, copy to dst */
+
+	add.l	#1, %a4			/* inc dst by 1 */
+	sub.l	#1, %d5			/* dec cnt by 1 */
+	bne	asm_dspi_rd_loop2
+
+	move.l	#0x00040000, %d2	/* Terminate */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	/* jump to memory and execute */
+	move.l	#(TEXT_BASE + 0x400), %a0
+	move.l	%a0, (%a1)
+	jmp	(%a0)
+
+asm_dspi_wr_status:
+	move.l	(%a1), %d0		/* status */
+	and.l	#0x0000F000, %d0
+	cmp.l	#0x00003000, %d0
+	bgt	asm_dspi_wr_status
+
+	move.l	%d2, (%a2)
+	rts
+
+asm_dspi_rd_status:
+	move.l	(%a1), %d0		/* status */
+	and.l	#0x000000F0, %d0
+	lsr.l	#4, %d0
+	cmp.l	#0, %d0
+	beq	asm_dspi_rd_status
+
+	move.b	(%a3), %d1
+	rts
+#endif			/* CONFIG_CF_SBF */
 
 	.text
-
+	. = 0x400
 	.globl	_start
 _start:
 	nop
@@ -132,11 +366,16 @@
 	move.w #0x2700,%sr		/* Mask off Interrupt */
 
 	/* Set vector base register at the beginning of the Flash */
+#if defined(CONFIG_CF_SBF)
+	move.l	#TEXT_BASE, %d0
+	movec	%d0, %VBR
+#else
 	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
 
 	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1
+#endif
 
 	/* initialize general use internal ram */
 	move.l #0, %d0